PG16/PG21/PG29/PG36
Cable Gland

Product Features

No need to remove and reinstall connectors from cables for installation
Creates a liquid tight seal around cables 
Protection Rating: IP67; NEMA 4X  
If Cable Diameter = Insert Hole Diameter
Protection Rating: IP65; NEMA 3
If Cable Diameter is up to 10% less than Insert Hole Diameter
Body available in Polyamide, Nickel Plated Brass or 316 Stainless Steel
Cable gland insert available in TPE
Sealing washer available in polyethylene, Viton, BUNA-N, or silicone

The PG series Cord Grips are a low cost, highly configurable solution for creating a watertight seal around one or more cables of varying sizes. The cord grip can be drilled for multiple configurations depending on how many cables are utilized.

The unique feature about this product is the split insert. The split insert eliminates the need to remove connectors from cables during installation, facilitating the use of premade cables.

The limiting factor then becomes the cord grip ID versus the width of the connector assembly on the prefabricated cable. The PG36 cord grip can accommodate a 36mm connector (for example, a DB-9 or HD-15 connector).

The PG series cord grip is offered in Polyamide, Nickel Plated Brass, or 316 Stainless Steel.

Part

A

B

C

D

E

F

G

32.5(1.28)

23.0(.91)

9.5(.37)

22.5(.89)

27.0(1.07)

29.5(1.16)

16(.63)

38.0(1.50)

27.0(1.06)

11.0(.43)

28.3(1.11)

33.0(1.26)

36.5(1.44)

21(.83)

45.5(1.79)

34.0(1.34)

11.5(.45)

37.0(1.46)

43(1.69)

46(1.81)

28(1.1)

48.0(1.89)

34.0(1.34)

14.0(.55)

47.0(1.85)

53(2.11)

57(2.24)

37(1.47)