30S Enclosure
Harsh Environment
Good for Washdown Areas

Product Features

· Built for highly corrosive environments
· Supports over 40 different inline cameras
· Meets IP65 standards (contact APG for IP66 options)
· 100% 316 stainless steel construction
· Designed to work in food applications
· Camera to Viewport distance can be changed to handle long or wide angle lenses
· Comes standard with glass or polycarbonate viewport
· Works with pre-made cables

The 30S enclosure is a 316 stainless steel housing for your smaller inline style camera. Designed to work in highly corrosive environments, it also is designed to work in food applications, with care taken to reduce pockets where water might sit.

The enclosure is highly configurable, with air cooling and air curtain faceplate options.

The standard cable gland at the bottom of the enclosure uses a split insert to provide a watertight seal around one or more cables. The gland allows passage of the standard I/O and power cable (and the Ethernet cable) without removal of the connectors from the cables.

The enclosure is designed so that once the enclosure cover is removed, the user has full access to the camera & lens, taking the guesswork out of changing focus and f-stop settings.

The standard 30S enclosure allows the lens to be adjusted close to the viewport to reduce reflections. The enclosure also is designed to readily accommodate large diameter lenses or ringlights up to 50mm in diameter (lit area).