Pan and Tilt Camera Mount
- Stainless Steel Construction
- 2 axis (pan, tilt) mounting
- A 3/8" hole & fastener are all you need to mount your camera
- Designed for all Cognex 5000, DVT 500 & Matrox series Sensors
- Comes with all camera mounting fasteners
The PTU-AB Camera Mount is designed to make mounting and aiming your Cognex Checker, DVT 500, Cognex 5000 or the Matrox series camera as easy as possible.
Separate fasteners allow independent adjustment of the pan and tilt axis. There
is plenty of material in the mount to allow each axis to be pinned in position
once correct aim has been established. Additionally, the tilt axis is surfaced
with a carbide grit that keys into the opposing surface, substantially increasing
the stiffness of the joint.
The PTU-AB mount can be assembled in several different ways depending upon
your mounting situation.
PTU Mount with Cognex Checker (right)
- Tilt axis swings throughout 200 degrees of arc.
- Foot and Camera arm are 304 stainless steel.
- All fasteners are stainless steel.
- Fasteners to mount the camera are included.
Weight: 2.1 lb.
Cognex Checker, Cognex 5000/DVT 500, Matrox series, Pan and Tilt Mount